Once the epoxy countertop has completely cured, you will want to reinstall the countertop. The epoxy will be dry to the touch after 24 hours however, the epoxy will not be fully cured for at least three days. Once the countertop has been torched and all of the air bubbles have been removed, the epoxy must be allowed to completely cure. The torch is moved across the surface of the countertop using a sweeping motion about 2 to 3 inches from the countertop surface. Step Six: Torch the CountertopĪ small propane torch or a heat gun is used to remove air bubbles from the epoxy. A notched trowel will then be used to spread the epoxy evenly across the entire countertop surface. The epoxy mixture should then be poured onto the center of the countertop. Step Five: Apply the Epoxy to the Laminate Countertop A specialized mixing blade that attaches to a drill ensures the epoxy is properly mixed and ready for application. The two parts should be mixed for at least two minutes to ensure the hardener is dispersed throughout the resin. Step Four: Mix the EpoxyĮpoxy countertops are made by mixing the epoxy resin with a hardener. Then, the dust and debris must be wiped up using a damp cloth. Once the countertop is wiped down with TS, the laminate countertop surface will be roughed up using sixty grit sandpaper. TSP effectively removes grease and grime from the countertop surface. The countertop must be cleaned using TSP. Properly preparing laminate countertops is key to ensuring the epoxy adequately bonds to the countertop surface. Step Three: Prep the Countertop for Epoxy Application In addition to this, rosin paper is used to protect the floors and prevent slips and falls during the installation process. A roll of three mil plastic and painter's tape is used to prevent the epoxy from getting on the floors or cabinets. The epoxy used to transform a countertop can be messy therefore, the cabinetry and flooring, and countertops must be protected. After this, the sink can easily be lifted from the countertop.

Removing a sink involves unhooking the water lines and the drain lines from the sink, removing the silicone caulk from around the sink, and removing the hardware that attaches the sink to the countertop. In order to apply epoxy over laminate countertops, the sink will need to be removed. Let's take a look at the steps involved when applying epoxy over laminate countertops. However, before the epoxy is applied, you must ensure that your countertop surface is clean. Epoxy can be directly applied to many different surfaces, including laminate countertops, Formica, MDF, ceramic, tile, metal, glass, and porcelain. If the surface is porous, you must prepare it before applying the epoxy. Epoxy coatings allow you to change the color of your countertops to match your current decorating scheme.Įpoxy can cover almost any surface however, there are steps that must be followed. Epoxy coatings provide you with an affordable way to revamp your laminate countertops and create an attractive and durable finish. One of the best ways to do this on a budget is to use epoxy over laminate countertops. If your laminate countertops have become damaged, discolored, or stained, you may be looking for an affordable way to make your countertops look fresh and new again.

Resurfaced multispec countertops